WET STRENGTH ENHANCEMENT
Technical Specification Sheet
| PRODUCT | PTSC WSR 3613 |
|---|---|
| Appearance | Pale Yellow |
| lonic character | Cationic |
| Total solid % | 13.0 +- 1% |
| pH | 3.0 – 5.5 |
| Viscosity – cps (at 25°C) | 10 – 100 |
Technical Specification Sheet
| PRODUCT | PTSC WSR 3615 |
|---|---|
| Appearance | Pale Yellow |
| lonic character | Cationic |
| Total solid % | 15.0 +- 1% |
| pH | 3.0 – 5.5 |
| Viscosity – cps (at 25°C) | 10 – 100 |
Technical Specification Sheet
| PRODUCT | PTSC WSR 3620 |
|---|---|
| Appearance | Pale Yellow |
| lonic character | Cationic |
| Total solid % | 20.0 +- 1% |
| pH | 3.0 – 5.5 |
| Viscosity – cps (at 25°C) | 10 – 100 |
Technical Specification Sheet
| PRODUCT | PTSC WSR 3625 |
|---|---|
| Appearance | Pale Yellow |
| lonic character | Cationic |
| Total solid % | 25.0 +- 1% |
| pH | 3.0 – 5.5 |
| Viscosity – cps (at 25°C) | 10 – 100 |
Product Description
PTSC WSR Series Wet Strength Resin PTSC WSR Series is a cationic polyamide wet strength resin supplied as an aqueous solution containing Approximate 13.0% solids. When applied under acidic or alkaline stock conditions, PTSC WSR Series will efficiently increase the wet strength properties of finished paper or paperboard products. Use and Application PTSC WSR Series resin is highly effective for developing wet strength in facial tissue, napkins, towels, carrier board, liquid packaging, bag paper, linerboard, medium, and other specialty papers. PTSC WSR Series performs over a broad pH range of 4.0 – 9.0 (with best efficiency between 6.5- 8.0) in the presence of normal papermaking additives. Typical furnish levels range from 0.2 to 0.75% (dry basis), which is dependent upon the wet strength level desired and the grade being manufactured. PTSC WSR Series can be added to either the thin or thick stock systems. Best results are achieved with sufficient random dilution and maximum
available stock agitation at the point of addition. PTSC WSR Series should be added after rosin size and alum addition.
The wet strength is not fully developed by the time a paper product reaches the end of a paper machine, and strength continues to develop as the paper is stored. The rate of curing is affected by the temperature and the length of time in contact with heat. The bonds that are eventually formed are not readily broken under either acid or slightly alkaline conditions, and the wet strength is therefore permanent. Whilst this can be an advantage in certain applications, it does make the paper or paperboard more difficult to disintegrate.
Benefits
• Effective at the pH 4 to 8, optimum wet strength is obtained in a neutral or slightly alkaline medium.
• It is used extensively in all types of wet-strength papers. e. paper towels, napkins, facial tissue, and packaging materials like liquid packaging, corrugated boxes, paper bags, and specialties such as photographic papers, wrappings and disposables.
Safety
According to the experience we have gained over many years and other information they do not exert any harmful effect on health, provided they are used properly. For details go through the safety data sheet.
Handling & Storage
Should be stored in original packaging in cool and dry place(00C-250C), away from sources of heat, flame and direct sunlight, this product will be stable for at least 2 months.
Standard Package
PTSC WSR Series is delivered in 220 kg HDPE drum. other packing sizes on request. ( IBC TOTE – 1000KG ).