RETENTION-DRAINAGE-PROGRAM
Product Characteristics
| PRODUCT | P FIX |
|---|---|
| Appearance | Colorless Liquid |
| pH (0.2% solution) | 5±1 |
| Specific Gravity at 30oC | 1.11±0.02 gm/cc |
| Total Solids (min.) | 50 ±1% |
| Emulsion Charge | Cationic |
| Shelf Life | 6 Months |
Technical Specification Sheet
P FIX is a copolymer of epichlorohydrin and alkylamine which extends high cationicity to the fiber to neutralize its anionicity to reduce its potential difference with respect to the ionic charge of cationic chemicals and helps to provide better efficiency of all cationic changed chemicals in the wet end, in order to fix the AKD molecule to the fiber being used in paper production
Application
P FIX is recommended to be used after dilution with fresh water in any concentration preferably 50-300 GPL in thick stock of pulp. The
best point of addition is thick stock line which leads to Fan pump or suction of machine chest pump.
Solution Preparation
Water is to be added into the chemical.
Chemical Name
COPOLYMER OF EPICHLOROHYDRIN AND ALKYLAMINE
Material Safety Data Sheet
This chemical is declared in “NON-HAZARDOUS” category.
Chemical Handling Instruction
- Wear protective gloves.
- Wear protective shoes - Spilled substance increases risk for slipping.
- Do not flush with water.
- Dam up.
- Soak up with neat absorbent material. If liquid has been spilt in large quantities clean up promptly by scoop or vacuum.
Action in case of contact with Chemical
- Wash with plenty of soap & water.
- Does not cause harm/irritation to skin.
- In case of swallowing of the chemical immediately allow vomiting & contact doctor.
Fire-Fighting Measures
- Use Fire Extinguisher Grade “B”.
- Use respiratory protection independent of recirculated air.
Ecological Information
Effects in sewage treatment plants (bacteria toxicity: respiration / reproduction inhibition) according to present experience, no adverse effects on water purification plants.
Product Characteristics
| PRODUCT | P FLOC |
|---|---|
| Appearance | White to off white powder |
| pH (0.2% solution) | 7±1 |
| Bulk density | 0.80 g/ml |
| % NVS | 90±5 |
| Emulsion Charge | Cationic |
| Shelf Life | 12 Months |
Technical Specification Sheet
P FLOC is a cationic polyacrylamide powder to serve the purpose of retention of fines and fillers in paper & board production.
Application
P FLOC is recommended to be used after preparing the solution in a range maximum up to 5 GPL concentrations and the final concentration at the point of addition should be 0.5 GPL. The best point of addition is in thin stock either before or after the pressure screen depending upon the machine response.
Solution Preparation
To prepare a ready to use polymer solution it is recommended to use suitable make-down equipment which provides a homogenous
and lump free solution and a minimum holding time of 60 minutes prior to application. In-line filtration of the polymer solution is
recommended.
CHEMICAL NAME
COPOLYMER OF ACRYLAMIDE/ETHANAMINIUM N,N,N-TRIMETHYL-2-(1-OXO-2-PROPENYL) OXY CHLORIDE.
Material Safety Data Sheet
This chemical is declared in “NON-HAZARDOUS” category.
Chemical Handling Instruction
- Wear protective gloves.
- Wear protective shoes - Spilled substance increases risk for slipping.
- Do not flush with water.
- Dam up.
- Soak up with neat absorbent material. If liquid has been spilt in large quantities clean up promptly by scoop or vacuum.
Action in case of contact with Chemical
- Wash with plenty of soap & water.
- Does not cause harm/irritation to skin.
- In case of swallowing of the chemical immediately allow vomiting & contact doctor.
Ecological Information
Fish - LC 50/Fathead minnows/96h>1000mg/l.
Algae - EC 50/Selenastrum capricornutum/96h >500 mg/l.
Bioaccumulation - The product is not expected to bio accumulate.
Degradability/Persistence - Readily biodegradable
Product Characteristics
| PRODUCT | P MICRO – P |
|---|---|
| Appearance | Viscous Milky Liquid |
| pH (0.2% solution) | 7±1 |
| Bulk density | 1.0±0.05 g/ml |
| % NVS | 37±3 |
| Emulsion Charge | Anionic |
| Shelf Life | 6 Months |
Technical Specification Sheet
P MICRO-P is an anionic copolymer of acrylamide / sodium acrylate to enhance drainage phenomenon without affecting the formation of paper and board.
Application
P MICRO-P is recommended to be used after preparing the solution in range of maximum up to 5 GPL concentrations and the final concentration at the point of addition should be 0.5 GPL. The best point of addition is in thin stock after the pressure screen and after the point of addition of retention aid.
Solution Preparation
To prepare a ready to use polymer solution it is recommended to use suitable make-down equipment which provides a homogenous and lump free solution and a minimum holding time of 45 minutes prior to application. In-line filtration of the polymer solution is recommended.
CHEMICAL NAME
COPOLYMER OF ACRYLAMIDE/SODIUM ACRYLATE
Material Safety Data Sheet
This chemical is declared in “NON-HAZARDOUS” category.
Chemical Handling Instruction
- Wear protective gloves.
- Wear protective shoes - Spilled substance increases risk for slipping.
- Do not flush with water.
- Dam up.
- Soak up with neat absorbent material. If liquid has been spilt in large quantities clean up promptly by scoop or vacuum.
Action in case of contact with Chemical
- Wash with plenty of soap & water.
- Does not cause harm/irritation to skin.
- In case of swallowing of the chemical immediately allow vomiting & contact doctor.
Ecological Information
Fish - LC 50/Fathead minnows/96h>1000mg/l.
Algae - EC 50/Selenastrum capricornutum/96h >500 mg/l.
Bioaccumulation - The product is not expected to bio accumulate.
Degradability/Persistence - Readily biodegradable